A show stopper would be if the adapter doesn’t fit in at all, because its connector is placed as such that the adapter is displaced in relation to the HDD/SSD, making it impossible to fit them both at the same time. Another problem could be the height of the adapter and the resulting displacement of the 2.5 inch HDD or SSD. Such an adapter would therefore have to be very small in dimensions. The problem: the Mac mini G4 doesn’t provide much space for additional adapters. So, a solution is to use an adapter to convert from 44-pin IDE to SATA. That is very unfortunate, especially since the Mac mini G4 came with drives of 40 to 80 GB capacity, which is not much compared to today’s standards (2015).īut, once you decide to upgrade, you face the current market situation, where IDE 44-pin 2.5 inch HDDs are much more expensive than regular 2.5 inch SATA HDDs or even 2.5 inch SATA SSDs! The strategy, in theory… Just noticed original drive not working either.One of the problems of the original Mac mini (2005, G4 PowerPC processor) is that it still uses 2.5 inch parallel ATA (PATA) drives. Hold the keys down until the computer restarts and you hear the startup sound for the second time. Press and hold the Command-Option-P-R keys before the gray screen appears. You will need to hold these keys down simultaneously in step 4. Locate the following keys on the keyboard: Command (⌘), Option, P, and R. Wait five seconds, then press the power button to turn on the computer. Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve I would try an SMC and NVRAM reset and hope that allows the screen and Internet Recovery to work. Internet Recovery should work on a blank, unformatted drive. My guess is it won't boot from an external drive either. The black screen indicates there is something else going on here. Reboot one more time, to be sure everything is working as intended. If it does, success! Now go to the Startup Disk in System Preferences and set the NEW SSD to be your startup drive.ġ4. When done, restart again, and invoke the Startup Manager as you did above in Step 4. Let CCC do its thing, It may take a while.ġ2. CCC will even replicate the recovery partition on the new internal SSD.ġ1. On the right, select the new SSD as the "Target" drive. On the left, select your OLD HDD as the "Source" drive. Next, you have to transfer your stuff over to it.ĬCC is FREE to download and FREE to use for 30 days.ġ0. Now, the SSD should mount on the desktop in the finder.Ĩ. When you get to the Finder, open Disk Utility (in the Utilities folder) and initialize the internal SSD. The Mini should now boot from the OLD HDD in the dock.Ħ. Click on it with the pointer, and hit return.ĥ. You should be able to see the OLD HDD in the Startup Manager. As soon as you hear the startup sound, hold down the option key and keep holding it down until the startup manager appears.Ĥ. Once you have it, put the OLD HDD into it and connect it to the Mini.ģ. If nothing else seems to be working, I will offer a procedure that has a very high chance of success:įirst, be aware that the Mini probably isn't going to be bootable in any way UNTIL you do something like the following:Ģ.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |